Diego,
With hdmi connect directly to Samsung TV, i use Entech Moninfo and got the full EDID.
In moninfo I save as .inf, and in this section:
;Extension bloc #1, e.g., CEA-EXT, DID-EXT, etc.
HKR,EDID_OVERRIDE,"1",0x01,0x02,0x03,0x27,0x71,0x4B,0x90,0x1F,0x04,0x13,0x05,0x14,0x03,0x12,0x20,0x21,0x22,0x23,0x09,0x07,0x07,0x83,0x01,0x00,0x00,0xE2,0x00,0x0F,0xE3,0x05,0x03,0x01,0x67,0x03,0x0C,0x00,0x30,0x00,0xB8,0x2D,0x01,0x1D,0x00,0xBC,0x52,0xD0,0x1E,0x20,0xB8,0x28,0x55,0x40,0xA0,0x5A,0x00,0x00,0x00,0x1E,0x01,0x1D,0x80,0x18,0x71,0x1C,0x16,0x20,0x58,0x2C,0x25,0x00,0xA0,0x5A,0x00,0x00,0x00,0x9E,0x01,0x1D,0x80,0xD0,0x72,0x1C,0x16,0x20,0x10,0x2C,0x25,0x80,0xA0,0x5A,0x00,0x00,0x00,0x9E,0x8C,0x0A,0xD0,0x8A,0x20,0xE0,0x2D,0x10,0x10,0x3E,0x96,0x00,0xA0,0x5A,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x8C
I changed 0xE2,0x00,0x0F to 0xE2,0x00,0xCF according to CEA-861-D Video Capability Data Block (VCDB)
Then saved the .inf, went to device manager and updated the Samsung Tv driver to use this inf.
Then the registry changed to this:
But intel driver does not respect this override, so i had to reprogram the eeprom edid of my tv.
Using this info https://sites.google.com/site/chrisbecke/home/edid-reprograming
I corrected the QS bit and the cheksum.
Now with my denn avr in between the notebook and tv i am again with limited range,because the denon avr doesn't respect the QS bit