Well the system info is in the 2nd link from top and I have no clue how to find out what specific chip I got so I will just dump picture of my system info here instead.
Regarding the raid question, i dont know what type of RAID I have, or whether or not I have it.
@ dh2, Following is the information on 144Hz support that should help you configure your system.
When using DVI:
Intel HD Graphics 4600 Does not support Dual DVI natively (however DP to Dual DVI Active Dongle might work- but not supported ) and Max Pixel Clock is supported on Single Channel DVI is 165Mhz.
So max on DVI at 1920 x 1080 is 60p Hz.
HDMI :
Intel HD Graphics 4600 Max Pixel Clock supported on HDMI is 300Mhz. So max on HDMI at 1920 x 1080 is 60p, 85p,100p, 120pHz.
Note : 1920 x 1080 (144p Hz) is not supported on HDMI as it Exceeds the max Pixel Clock supported by our Intel HW ( 300Mhz)
Driver will enable and support 300Mhz based on HDMI Panel’s (HDMI Registration ID supplied by panel )
When using DispalyPort :
Intel HD Graphics 4600 Max Pixel Clock supported on DisplayPort Various based on SKU - ( Based on CD Clock of the SKU – Which is OEM setting via System bios.)
So based on what the BIOS has enabled, at 1920 x 1080, 60p, 85p,100p, 120p,144pHz are supported.
We tested based on your configuration and found the following:
With DisplayPort, working fine on DisplayPort Interface ,Which means we are able to see and apply 1920 x1080 @ 144Hz without any issue..
Above is from our CUI. Driver used : 10.18.10.3618 ( Dated 5/12/2014 )
Thanks
Robert
@ SonicMaster, Sylvia is needing the model number of the ASUS system (i.e. UX31A). That info is not available in the linked reports. Could you please provide the model number?
Thanks
Robert
System Model: S551LB
I presume system model is the type specific type and series of my laptop, its in the sys.info within the 2nd link.
It is impossible to play any video longer then few minutes because driver keeps crashing.
Tried bunch of programs and all have same problem.
Other graphics card (removed for testing) works without problem.
I tried to update my driver a, Intel HD Graphics 4000, and it said it was customized by another manufacturer and i know it wasn't. I proceeded to try every update and nothing worked so i tried to uninstall it and reinstall it and now i cant even reinstall it back to its old settings. please help!
Thanks for joining the graphics community.
I am sorry to hear that have had problems updating Intel Graphics Driver.
That message indicates that your computer manufacturer does not allow the installation of generic Intel video drives. You are required to install drivers from your computer manufacturer, however, you may try forcing the installation of Intel generic drivers by performing manual procedure, see here for instructions:
http://support.intel.com/support/graphics/sb/CS-022355.htm
Select your operating system version and download the zip version of the video driver:
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProdId=3712
Allan.
@ IceDarkness, Do you see the TV as a display in the Windows Display settings? If you press the Windows + P key does the TV appear in the list? Also, what model is the TV?
Thanks
Robert
Thanks for joining the graphics community.
I understand you have an issue with audio through HDMI monitor.
You may need to select proper audio output device.
a) Press the ‘Windows + D’ key on the keyboard.
b) Right Click the Volume icon and select the Playback Devices, set HDMI monitor to the default device.
Allan.
Thanks for joining the graphics community.
I understand you are experiencing an issue with Intel® HD Graphics 5100 and Outlook 2013.
I would like to know if you already tried latest beta driver available on our site, this is version 3652
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23985&lang=eng&ProdId=3722
Also, does this problem occur with drivers provided by the board or computer manufacturer? If so, which driver versions numbers?
Are you using straight cables? This means no video cables adapters.
Thanks.
Allan.
Thanks for joining the graphics community.
I understand you are trying to install video drivers from Lenovo but the installation does not continue.
The driver version from Lenovo is version 3496; this driver appears to be customized for your computer model.
Please try installing our generic version 3621, this is available at:
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProdId=3719
If you still have problems installing our generic driver, please try performing manual installation, see below for installation instructions:
http://support.intel.com/support/graphics/sb/CS-022355.htm
Allan.
@ anonymousfriend, If you click Maximize on the Advance Find does it resolve the issue?
@ dmit.bit, we are investigating the issue you reported and will update this thread as needed. Thanks for finding this issue.
Also, do you have the Half Life 2 update installed (via Steam)?
Thanks
Robert
I also discovered this problem while playing civ v on dx11. However, the weird thing is in one of the first times this happened, it reverted back to 1080p. I have no idea why. Since then it has continuously been forced into 1080i and flickered. I have found this to be the case with multiple other games on steam as well, but only when running on my second monitor on full screen.
Some basic system info:
comp- (i7 4710mq 2.50ghz, intel hd 4600, nvidia gtx 765m 2gb (both running latest drivers as of 7/24), windows 8.1 64 bit, 16 gb ram)
monitor - (asus VS247H-P 24in, 1080p 60hz led connected via hdmi)
Has anyone been able to change the res to 3840x2160p 60hz with intel drivers ? as soon as I enable Displayport 1.2 in my Dell UP3214Q monitor all hell breakes loose, at least with the latest 15.36.0.3652 drivers I dont get BSOD, Is intel working to fix this???
Hi
You can download the latest Intel HD Graphics driver for your system at the following link.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23884&lang=eng&ProdId=3719
Thanks
Robert
I found the following forum would you please check it out http://15thmeu.net/forums/index.php?PHPSESSID=krre9pl2qvfgikn3s9rjqb0dq3&topic=14023.0
Hello Roman, you may try the following drivers:
8.0.4.1.1096: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23473
8.0.4.0.1091: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22633
8.0.3.0.1089: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22479
Please bear in mind that the supported operating system is Windows* 7 32-bit.
Graphics Drivers — Supported operating systems
More information is available here:
Intel® Graphics Media Accelerator 3600 Series — Intel® Graphics Media Accelerator 3600 Series FAQ
I understand original LCD screen supported 1024*768 and you have replaced it for new screen capable of 1400*1050.
Please bear in mind, supported resolutions will depend on the actual graphics chipset and the graphics VBIOS (video BIOS). If you are not able to obtain 1400*1050 is because the Vbios on your computer has been locked and will not display higher than 1024*768.
In this case, Intel recommends updating to the latest generic video drivers:
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProdId=2301
For any other type of graphics configuration at BIOS level or video BIOS you need to contact your computer manufacturer.
Allan.
But I reported "This laptop is dual-booting with Lubuntu 14.04, and that display driver works fine, which confirms that the Intel 945 hardware supports 1400x1050, and also confirms that the BIOS is not restricting the supported display modes."
Since Lubuntu will give me 1400x1050 with the same graphics chipset and VBIOS, doesn't that indicate clearly that those are not where the problem lies?
